Exposed Aggregate Sealer and Coatings

exposed-aggregate-sealerExposed Aggregate patios, driveways, and walkways are decorative stone surfaces commonly used in residential and commercial landscaping. These surfaces require a coat of a new sealer to provide protection and enhancement to the substrate. This Exposed Aggregate Sealer is typically applied every 1-3 years depending on the exposure and traffic.

There are many advantages to sealing an exposed aggregate surface:

  • Gives surface a richer color and added shine
  • Protects from winter salts
  • Seals from hairline cracks and pitting of aggregate

Sealing Exposed Aggregate is very easy and any residential homeowner can do this with ease.

Prep Aggregate First

  1. Clean surface with a pressure washer to remove dirt.
  2. If needed use a concrete cleaner to remove stains such as grease or rust.
  3. After drying for 24-48 hours, apply a exposed aggregate crack filler to any large cracks.


Apply Exposed Aggregate Sealer

  1. Using a roller, apply sealer and a spread rate of 100-150 sq. feet per gallon making sure not to puddle the sealer.
  2. Let dry for 1-3 hours
  3. If needed, apply a light second coat to even out the appearance or increase the gloss level


Maintaining Your Exposed Aggregate Surface

Typically it us best to repeat this process every 1-3 years to keep your aggregate protected and looking great.

Best Sealers For Exposed Aggregate

We personally like solvent based acrylic sealers for this. Here are our top products for this:

  1. SuperSeal 30
  2. SuperSeal 25
  3. SuperSeal Matte
  4. SuperSeal VOC


Questions on Sealing Exposed Aggregate? Please ask below

Write Reviews / Ask Questions (13)

Subscribe to this comment's feed
Home owner
What would the shelf life be on a partial used 5gal of Super seal 30
Tom Ebner , August 23, 2013
Tom, about 6-12 months.
ConcreteSealerStore , August 25, 2013
Will one of the above mentioned products help make the exposed aggregate easier to walk on? Over the years some of the cement has deteriorated and exposes more of the rocks and it is getting a little uncomfortable to walk on. The area is around a pool and gets a lot of traffic. Also, will one of the products make it less hot to walk on?
Sonia , April 15, 2014
Sonia, sorry but a sealer cannot make a surface "easier" or less "hot" to walk on.
ConcreteSealerStore , April 16, 2014
How do I remove aggregate sealer from slate patio floor!
randy newell , June 03, 2014

With this:
ConcreteSealerStore , June 03, 2014
Store Number
Good morning,
I am looking for the local telephone number for the ConcreteSealerStore located at Bloomfield Hills, MI. Coulf you please provide that for me. I am looking to order 2 pals of Superseal30
Des , July 21, 2014

We do not take phone orders from Canada. For questions call 248.858.8900.
ConcreteSealerStore , July 22, 2014
bus owner and home owner
How does Super Seal 30 compare with more expensive Glaze N Seal Wet Look Green Lacquer and is it legal to be used in California? Is it sold in any Calif. businesses?
ronald hulse , August 25, 2015
home owner
I forgot to ask but is S.S. 30 the best product in your line for 20 year old exposed aggregate that has never been coated. Also will one coat using 100 sq. ft. per gallon coverage do this driveway?
ronald hulse , August 25, 2015
SS30 is not legal for CA. You can use the SS VOC version there. One coat will cover about 100-125 sq. feet.
ConcreteSealerStore , August 26, 2015
My agregate driveway has some flaking of the material. Will a sealer help? There is also a crack. Will a sealer fill this?
Gerald zel , May 11, 2016
re: Will a sealer help
Aggregate sealers do not fill cracks nor do they fix flaking material.
ConcreteSealerStore , May 12, 2016

Ask a Question or Write Review

smaller | bigger
security image
Write the displayed characters

Your Cart is currently empty.

Join Mail List!

Subscribe for Product Tips, Info and Periodic Coupons!