Pre-Etcher

+
-
Etch and Clean is a concentrated, acidic cleaning solution that produces a light etch. The material uses phosphoric acid to lightly etch the surface and remove mild efflorescence. Using phosphoric instead of muriatic acid gently increases the porosity without damaging the substrate, therby allowing better penetration.

Application:

Dilute the material as described. Test Etch and Clean to assure compatibility. Pre-wet surface with water. Apply with pump sprayer and scrub with nylon brush. Do not allow the solution to dry on the substrate. Once cleaning is complete, pressure wash or scrub with clean water, rinsing away all the cleaning solution. Let dry completely before application of coating or stain.

Write Reviews / Ask Questions (0)

Subscribe to this comment's feed

Ask a Question or Write Review

smaller | bigger
security image
Write the displayed characters

busy