SuperSeal Matte 5 Gallon

+
-

SuperSeal Matte will darken the substrate like a "wet look" put has an additive to reduce the shine.

SuperSeal Matte can be used for Concrete Brick Pavers, Stamped Concrete, Stamped Cement, Decorative Cement, Bricks, Acid Stained Cement, Concrete Stains, and Exposed Aggregate.

SuperSeal Matte can be sprayed on with the Chapin 1949 Concrete Sprayer or applied with a 1/2" roller cover. You cannot use a plastic "inexpensive" sprayer. SuperSeal Matte will help sand erosion reducing the amount of weeds.

One coat is recommended. Coverage is about 100 feet per gallon or 500 feet per five gallon.

One coat will result in a satin sheen depending on porosity of brick.

free shipping with ground services

Write Reviews / Ask Questions (37)

Subscribe to this comment's feed
...
I had about 2000+ square feet of pavers put in around our pool. I need to have them sealed. I live in SW Florida. The sealer I had recommended to me was "LastiSeal brick and mortar sealer - Satin". Is your product comparable to this as far as durability and coverage? Their product says it will cover approx 150 sq.ft. per gallon, as opposed to your coverage of 100 sq.ft. per gallon. Are they just being more optimistic than you?
Steve Stanley , December 27, 2011
re: Is your product comparable to this as far as durability and coverage
I am sorry but I have never heard of "LastiSeal". Without knowing what it does or what it is made of I have no way of comparing.

100 feet per gallon and 2-3 years is normal for a high end acrylic based sealer before it dulls and needs to be reapplied.
opwdecks , December 27, 2011
1 Gallon vs. 5 gallon
What is the percent solid content of your SuperSeal Matte?
Also, does it come in 1-gallon, which I might prefer to the 5-gallon for mixing and handling ease of use. Thanks.
John N , March 06, 2012
re: 1 Gallon vs. 5 gallon
The SuperSeal Matte is 25% solids. It only comes in 5 Gallon Pails.
ConcreteSealerStore , March 06, 2012
homeowner
Is your product water based or solvent based
Matthew Tighe , March 26, 2012
re: Is your product water based or solvent based
The SuperSeal Matte is a solvent based sealer.
ConcreteSealerStore , March 26, 2012
tinting
Does SuperSeal Matte come tented for natural aggregate color?
kenstrm , April 26, 2012
Sealer
Hello,

When this product wears in a few years does it peel? Is the wear noticable? Also does the Matte Finish still leave a shineand darken the color of basic grey pavers?
Jeff , July 05, 2012
re: Sealer
I does not peel but rather just fades evenly. It darkens the color and leaves a satin shine.
ConcreteSealerStore , July 06, 2012
Appropriate for Acrylic Concrete Coatings?
I have concrete covered with an acrylic coating to simulate flagstone. Can SuperSeal Matte be used to seal this type of surface? Also, I live in AZ and need a product with strong UV protection. Will SuperSeal Matt hold up well in this kind of environment?

Thank you!
JohnM , January 20, 2013
Appropriate for Acrylic Concrete Coatings?
Using an acrylic sealer such as the SuperSeal Matte should work well. We sell a lot of this sealer to the AX area.
ConcreteSealerStore , January 21, 2013
swimming pool pavers
Can the Superseal Matte be applied to swimming pool pavers.
Ernie , January 31, 2013
re: swimming pool pavers
Yes it can.
ConcreteSealerStore , February 01, 2013
homeowner
My newly poured colored concrete (color in the cement) was sealed the next day with a high gloss sealer. How do I get the high gloss off and give the driveway a matte finish?
ruby franklin , March 16, 2013
re: homeowner
Ruby, you would need to strip it off and start over. Putting the SuperSeal Matte on top my dull it some but probably not enough.
ConcreteSealerStore , March 17, 2013
Sheen on SuperSeal Matte
Looking at the description above and some of the replies above, it is unclear if the finish is actually matte or satin. In the description it says "One coat will result in a satin sheen depending on porosity of brick.". So, soes that mean you need two coats to get a matte finish? Is one or two coats required to seal cement pavers?

In a reply to another question, the responder wrote:
"RE: SEALER
I does not peel but rather just fades evenly. It darkens the color and leaves a satin shine." So is it a satin finish or a matte finish? Please clarify.
Suzette , June 16, 2013
mecanical designer
1.) How well does this product hold under cold weather?
2.) Can it be applied with a brush or mop?
Joe Ruiz , December 03, 2013
re: mecanical designer
1. About 2 years
2. Best to apply with a roller.
ConcreteSealerStore , December 04, 2013
SB-6000 or SuperSeal Matte?
Trying to get a sealer that enhances our paver's natural color but we dont want any type of shine. This one says Matte but I see in the comments a Satin shine. Which one of these 2 will be less likely to give me shine? Thanks.
Mightyjr27 , February 22, 2014
re: SB-6000 or SuperSeal Matte?
The SS Matte does have some shine. The SB-6000 has no shine.
ConcreteSealerStore , February 23, 2014
Superseal Matte for pool patio
Hi - I'm thinking about this produce for my stamped concrete pool patio which has discolored in areas and has light and dark patches throughout. Will application of this product help eliminate or at least reduce those patches and bring back a consistent look to the finish? If not what product would you recommend? Thanks so much
Will , July 28, 2014
re: Superseal Matte for pool patio
It will overall give a wet look to the stamped patio but it cannot "fix" any old sealer that has discolored by turning white or yellow in color.
ConcreteSealerStore , July 29, 2014
Superseal Matte for brick deck
I applied superseal matte to my brick deck with a Chapin HD sprayer after the bricks were cleaned, prepped and dried. The bricks took the sealer well, but I noticed that in some areas the bricks are glossy rather than just wet. I don't think this is from over spraying or overlapping near the edges since it is throughout the deck. Is there anything that I can spray on the bricks to get the finish to look consistent wet and not glossy on some bricks?
Richard Landry , October 28, 2014
re: SUPERSEAL MATTE FOR BRICK DECK
Did you mix thoroughly first?
ConcreteSealerStore , October 28, 2014
Superseal Matte for Brick Deck
I only shook up the 5 gallon bucket for about a minute to mix the sealer before putting it in the sprayer.
Richard Landry , October 29, 2014
...
The Matte has an additive that lowers the shine. If it is not mixed well prior to applying you could get dull and shiny areas. You cannot "spray" something on to make it even or duller in the shiny area. In addition the Matte does have some shine but it should be even if it is mixed well.
ConcreteSealerStore , October 29, 2014
Superseal Matte for Brick Deck
So the only way to possibly resolve the shiny areas on the bricks would be to strip the sealer off and start over, or possibly wait for the shin to diminish over time due to wear? Thought it was strange since it is shiny over a few bricks here and there throughout the deck, and not centralized in a specific area of the deck.

Thanks.

Richard Landry , October 29, 2014
...
I would just leave it alone and hopefully the shiny spots dull some. It might have just that those bricks were less porous, resulting in more shine.
ConcreteSealerStore , October 29, 2014
Super seal matt
Can this be used on regular clay brick pavers
Rob R. , June 14, 2015
re: Can this be used on regular clay brick pavers
Not on clay bricks as it will not dry evenly. Concrete brick pavers are good.
ConcreteSealerStore , June 15, 2015
Ceramic, Porcelain, Non-Skid Additive
Can this product be applied to ceramic or porcelain? Can non-skid additive be added?
Eric , September 10, 2015
re: Ceramic, Porcelain, Non-Skid Additive
No it cannot be applied to ceramic or porcelain.
ConcreteSealerStore , September 10, 2015
Solvent-based sealer over previous water-based sealer
Previous re-coating of my stamped concrete patio was a water-based sealer. I've stripped that old sealer off (at least it appears that way). Is it safe to apply solvent-based sealer?
DGiebel , September 10, 2015
re: Solvent-based sealer over previous water-based sealer
As long as the surface is porous, your removed the old sealer and it is not discolored from the old coating, then you will be okay to seal with a solvent.
ConcreteSealerStore , September 10, 2015
...
We are applying ss25 matte. After 2 years, do we need to strip and reapply or is it possible to recoat over existing? Thank you!
Jcrovatto , June 22, 2016
re: After 2 years, do we need to strip and reapply
Just clean off any dirt, etc and reapply. No need to strip.
ConcreteSealerStore , June 23, 2016
Need some advice on super seal product-
I have a Chicago brick deck and would like to seal it with a dull look- what product do you recommend and what prep is needed to be done before application.. I would like it to last as long as possible- we live on the gulf coast near New Orleans- thank you for your help! Also do your assortment of products all derive from the super sealer 25 product?
Just , January 31, 2017

Ask a Question or Write Review

smaller | bigger
security image
Write the displayed characters

busy
SuperSeal Matte 5 Gallon | SuperSeal Sealers | www.concretesealerstore.com
Your Cart is currently empty.

Join Mail List!

Subscribe for Product Tips, Info and Periodic Coupons!