MasonrySaver No-Rinse Concrete Etch – No need to rinse or neutralize prior to applying a stain or sealer
Product Summary
- MasonrySaver® No-Rinse Concrete Etch uses hydrofluoric acid to etch concrete or masonry surfaces prior to coating or sealing.
- A thin film etches any concrete surface in just 15 seconds, making it a fast and efficient solution.
- No neutralization or rinsing is required, allowing stains or epoxies to be applied directly after the surface dries.
- Saves significant time by allowing sealers or stains to be applied within hours instead of days.
- Coverage ranges from 200 to 400 square feet per gallon, varying based on substrate porosity.
MasonrySaver® No-Rinse Concrete Etch is a hydrofluoric acid-etching material designed for etching concrete or other masonry surfaces prior to coating or sealing. A thin film of Etch will etch any concrete surface in 15 seconds. After using MasonrySaver® No-Rinse Concrete Etch, a stain or protective coating such as Epoxies may be applied directly over the etched surface once the substrate has completely dried.
Product Uses:
Use MasonrySaver® No-Rinse Concrete Etch to etch concrete, brick, or masonry surfaces prior to coating.
Use MasonrySaver® No-Rinse Concrete Etch to etch concrete, brick, or masonry surfaces prior to coating.
Product Benefits:
- Etches all concrete, stone, tile, or brick surfaces
- Only generates the etching compound upon evaporation and contact with SiO2 or metal oxide
- Doesn’t require neutralization or rinsing
- Saves time – apply sealers or stains within hours instead of days
Coverage:
200-400 square feet per gallon on concrete. Coverage rates will vary based on the porosity of the substrate.
