SuperSeal-M 5 Gallon
SuperSeal-M 5 Gallon

SuperSeal-M 5 Gallon

$189.99
free shipping with ground services
Back to: Concrete Sealers

 

Non-Gloss Water Based Sealer

SuperSeal Brick-M is a water based Silicone Water Repellent  made of a special hybrid of Silane and Siloxane. SuperSeal-M provides water repellency to porous construction material such as bricks, stone, concrete blocks,  mortar, and grout. It is not suitable for very low-porosity substrates such as polished stone. It will not leave a sheen or "wet" look.

The active ingredients in SuperSeal-M Water Repellent Sealer are a mixture of different-size particles, some larger, some smaller to fill different size voids. This ensures good penetration into porous substrates, resulting in good coverage and durable water repellency. Additionally, the active ingredients in SuperSeal-M Water Repellent can chemically react with the substrate, ensuring long-lasting performance.

Water Beads up fast on substrates treated with SuperSeal-M Water Repellent Sealer. The product's excellent water repellent and fast beading action are immediately apparent. What you will not see is any change in the substrates appearance.

This product offers significant advantages:

  • It can be applied to "Green" concrete once bleed water is gone.
  • Prevent Spalling from salt and freeze/thaw damage.
  • Fast beading action-excellent water repellency.
  • Non-SiH: Easy to store and handle.
  • Low VOC-Supports your regulatory compliance efforts.
  • Water Based-Easy to use and clean up.
  • Will not add a slippery film.

Related Products

SuperSeal-M 1 Gallon

Concrete Sealers
$39.99
Chapin Clean & Stain Sprayer

Tools and Cleaners
$54.99
Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Eric flaherty · 06/22/2020
    Would the super seal m be a good product for a pebbled concrete pool deck? Planning on pressure washing first.
    • We will reply to your comment shortly
      ConcreteSealerStore · 06/22/2020
      Yes, it would if you are looking for a sealer and no change of appearance.
  • We will reply to your comment shortly
    Thomas · 11/05/2019
    I’ve seen different recommendations for how high of a pressure to power wash the driveway concrete at. Do you recommend closer to 2,000 psi or 3,000 psi? And is the 40 degree tip the best?
  • We will reply to your comment shortly
    Doug · 10/29/2019
    after applying superseal-M on garage floor to eliminate moisture penetration can i cover with flooring material?
    • We will reply to your comment shortly
      ConcreteSealerStore · 10/30/2019
      That would be more of a question for the flooring material you use and if they say it can go over a sealed floor or not.
  • We will reply to your comment shortly
    Tim · 10/21/2019
    Per the technical sheet for the Super Seal M, it can be applied at a minimum surface/air temperature of 50 degrees. If the sealer is applied during the day at the minimum 50 degree temperature, does it matter what the low temperature is overnight?
    • We will reply to your comment shortly
      ConcreteSealerStore · 10/21/2019
      It can drop below 50 but it should not drop below freezing the first night.
  • We will reply to your comment shortly
    Gary Lukey · 10/03/2019
    Toughcrete sealer claims 10 years prior the need to reseal with one coat. Your warranty is 5 years. How similar do expect the actual results to be on a Wisconsin driveway not used in winter months.
    • We will reply to your comment shortly
      ConcreteSealerStore · 10/03/2019
      Their warranty is a gimmick as nothing lasts 10 years. The Super Seal-M would work just as well or even better.
  • We will reply to your comment shortly
    Beth · 09/09/2019
    If we also want to stabilize the joint sand, is there something we could use in combination with this to stabilize and seal? (Rehabilitating a clay brick pathway)
  • We will reply to your comment shortly
    David · 08/31/2019
    How long before we can put our cars back in the driveway?
  • We will reply to your comment shortly
    clint · 07/04/2019
    What preparation should i do to my concrete garagefloor before I treat it with the superseal-m? How long does it last?
  • We will reply to your comment shortly
    Cristina Garcia · 06/07/2019
    I'm looking to seal a brick wall in a store, would this be the right product? How do you recommend I clean the bricks first?
    Thanks
  • We will reply to your comment shortly
    Winston · 05/31/2019
    I was asked to seal a new construction 30,000 sq. foot warehouse. What product would be good for this to make clean ups easier and maintenance easier.
  • We will reply to your comment shortly
    Wanda · 04/25/2019
    I need to seal the patio around a salt-water pool. The patio surface has not been sealed for 5 years. There are stains on the concrete. I have read that I can use a acid stain to give the surface a mottled/antique look and then seal. Can I use this sealer over the acid stain? Do you recommend any acid stains?
    • We will reply to your comment shortly
      ConcreteSealerStore · 04/25/2019
      No, not this sealer over an acid stain. You would need a decorative sealer like Super Seal 25 or Super Seal Matte.
  • We will reply to your comment shortly
    joey turner · 04/22/2019
    will this resist automotive fluids ? if so how much would it take for a 30x50 garage ? new concrete how would I clean it first ? thank you
    • We will reply to your comment shortly
      ConcreteSealerStore · 04/22/2019
      It would resist deep penetration, making cleaning of spills or oils much easier. Coverage is 200 sq feet per gallon. No need to clean if it is not dirty.
  • We will reply to your comment shortly
    Carie Williams · 04/20/2019
    We are sealing pavers that are being placed next to pool edge. We are thinking the Superseal M is the best optio. We also have concrete in the same are and would like to use the same product. The last quetion is we are planning on using a polymer sand as grout. Would this prodct be used to seal that grout as well or should we seal and then add the polymer?
    • We will reply to your comment shortly
      ConcreteSealerStore · 04/20/2019
      If you want to seal without changing or enhancing the appearance, then the SuperSeal-M is the correct product. Concrete sealers will not seal grouts. Does not matter when you use the poly sand. Before or after the sealer.
  • We will reply to your comment shortly
    Tami Caldwell · 04/10/2019
    I am using the product around pool area, do I need some type of sand mixed in so will not be slippery when wet?
    • We will reply to your comment shortly
      ConcreteSealerStore · 04/10/2019
      This is a penetrating sealer. It is not possible to add a grip to it nor is there any need.
  • We will reply to your comment shortly
    Ray · 04/06/2019
    does superseal m require etching of the cement?
  • We will reply to your comment shortly
    Tom Wagnitz · 02/07/2019
    I get water in my house when it rains hard and the wind is blowing. Will this product help?
  • We will reply to your comment shortly
    David Nardozzi · 12/22/2018
    Does this sealer work on grout in a shower floor?
  • We will reply to your comment shortly
    Justin Smith · 10/24/2018
    Can this product be used on wood?
  • We will reply to your comment shortly
    Kris · 09/10/2018
    Is this useful for joint stabilization also? I have a mixture of clay and concrete pavers with paver sand in the joints.
  • We will reply to your comment shortly
    David · 08/20/2018
    How does it clean up in a garden sprayer - water?
  • We will reply to your comment shortly
    David · 08/20/2018
    I am sealing a 1 yr old patio and 25+ yr old steps - is one coat enough?
  • We will reply to your comment shortly
    Virginia · 08/12/2018
    I want an interior slab sealed with a satin finish. No stain, new slab (poured a month ago) for kitchen livingroom. Also a broom finished covered porch. Is superseal-m the product I'm looking for?
    • We will reply to your comment shortly
      ConcreteSealerStore · 08/12/2018
      Sorry, but there is not a satin shine in the Super Seal-M. None of our products will have a "satin" shine for interior surfaces.
  • We will reply to your comment shortly
    Bill · 07/05/2018
    I live in upstate (Albany) NY. Would like to seal my concrete garage floor (never sealed) against road salt & water. Would SuperSeal M be a good product for this? If so, can it be rolled on and how much would I need for a 12'x30" garage floor? Thanks!
    • We will reply to your comment shortly
      ConcreteSealerStore · 07/06/2018
      Use the Super Seal-M and spray it on. Covers 200 sq feet per gallon so 2 gallons will work for you.
  • We will reply to your comment shortly
    Todd · 06/03/2018
    Can SuperSeal M be used on Travertine paver?
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/10/2016
    No it will not. None of our products will work for a shower.
  • We will reply to your comment shortly
    lauri · 06/10/2016
    will this work on plaster finish shower walls? tile and grouted shower floor? does it leave a sheen?
  • We will reply to your comment shortly
    ConcreteSealerStore · 02/24/2016
    1. Can I seal with your water-based sealant in the next few days? Yes as long as surface is dry.
    2. Will I need more than one coat? No
    3. How much sealant will I need? 2 of the 5 gallon pails will work
  • We will reply to your comment shortly
    Harry · 02/24/2016
    Sirs,

    I have about 1500 sq. ft. of concrete brick pavers. I just power washed them 2 days ago.
    1. Can I seal with your water-based sealant in the next few days?
    2. Will I need more than one coat?
    3. How much sealant will I need?
  • We will reply to your comment shortly
    ConcreteSealerStore · 07/19/2015
    This should work for you and does not change the appearance. Never heard of Ardex top dressing though.
  • We will reply to your comment shortly
    Gary Fritz · 07/19/2015
    Just repaired and top dressed 400 sq ft of concrete driveway in Western Pa. Used a Ardex CP to patch and Ardex CD top dressing on 400 sq ft. They said to seal to avoid water penetration and thus freezing in winter. They say use a acrylic material like Ardex Guard they sale. Any concern using your material since not acrylic? Advantages-Disadvantages . Also what is finish as I do not want a glossy finish.Thanks