SuperSeal25 Semi-Gloss 5 Gallon
SuperSeal25 Semi-Gloss 5 Gallon

SuperSeal25 Semi-Gloss 5 Gallon

$179.99
free shipping with ground services
Back to: Concrete Sealers

SuperSeal25 can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Bricks, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. SuperSeal enhances the natural color of your Concrete Brick Pavers and Cement with a "wet" look.

SuperSeal25 can be sprayed on with the Chapin 1949 Concrete Sprayer or applied with a 1/2" roller cover. You cannot use a plastic "inexpensive" sprayer. SuperSeal25 will help sand erosion reducing the amount of weeds.

One coat is recommended. Coverage is about 100 feet per gallon or 500 feet per five gallon. One coat will result in a satin/semi-gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

This Product is not VOC Compliant in Every State

Click here for a VOC Compliant Product.

Super Seal 25 is not suggested for Clay Pavers.

Related Products

SuperSeal25 Semi-Gloss 1 Gallon

Concrete Sealers
$39.99
Chapin Heavy Duty Sprayer

Tools and Cleaners
$159.99
Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    ConcreteSealerStore · 09/19/2013
    SuperSeal VOC
  • We will reply to your comment shortly
    Hedgehog · 09/19/2013
    Is this product compliant for Massachusetts or do I have to go with SuperSeal VOC?
  • We will reply to your comment shortly
    ConcreteSealerStore · 09/09/2013
    About 6-12 months on the shelf life.
  • We will reply to your comment shortly
    george lozovoy · 09/08/2013
    what is the shelve life of super seal 25 once a 5 gal can is opened?
  • We will reply to your comment shortly
    Leanne Lamm · 08/16/2013
    can the superseal 25 be tinted. If so will it peel after time?
  • We will reply to your comment shortly
    ConcreteSealerStore · 08/07/2013
    It can be but there is no need unless you want it to look richer. Do not get in water if at all possible.
  • We will reply to your comment shortly
    Jax · 08/07/2013
    Can/should superseal be applied to bullnose pavers surrounding a pool? If so, should I use a paintbrush to avoid getting any in the pool water?
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/27/2013
    Linda, I would look at the SuperSeal30 or SuperSeal25.
  • We will reply to your comment shortly
    Linda · 06/26/2013
    Hi have a 100ft aggregate driveway. Which product would last the longest and look good

    Thank you for your help
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/08/2013
    I do not think the grout will work if you already have a coat of sealer down. Have you done a test spot? I would think 1 day would be enough.
  • We will reply to your comment shortly
    John L · 06/07/2013
    I purchased this and I am extremely happy with it. I scored my acid stained floor to look like tile and want to grout it. Can I use a sanded tile grout in between coats? If so,how long do I have to wait to seal the grout after I finish grouting it...is overnight OK?
  • We will reply to your comment shortly
    ConcreteSealerStore · 03/28/2013
    No it is to be used in a pool.
  • We will reply to your comment shortly
    Bonnie · 03/28/2013
    is super seal 25 safe for use in a concrete fish pool?
  • We will reply to your comment shortly
    ConcreteSealerStore · 09/27/2012
    Between 45-90 degrees is best
  • We will reply to your comment shortly
    JohnK · 09/26/2012
    At what temperature range should the product be applied?
  • We will reply to your comment shortly
    JMM · 07/04/2012
    Is SuperSeal 25 a good choice for sealing textured acrylic coatings on top of concrete (i.e., a pool deck)? Does it offer good UV protection?

    Thank you!
  • We will reply to your comment shortly
    ConcreteSealerStore · 07/03/2012
    Anything that leaves a shine or darkens the color can be slightly slippery. No change in appearance will not be slippery.
  • We will reply to your comment shortly
    albert · 07/02/2012
    is the wet look more slippery than a matte or one that does not change the appearance at all. I'm afraid that even in the slightest mist people will slip since my pavers are laid on a slope in the driveway and path.
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/06/2012
    No it cannot.
  • We will reply to your comment shortly
    Will · 06/06/2012
    Question: Can the Super Seal 25 be used to seal the material below? Would like to use on my driveway.

    Restore Deck / Concrete Liquid Armor Resurfacer 4 Gal. Water Based Exterior Coating

    This product is sold at Home Depot and Lowes.

    Thank you in advance.
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/05/2012
    It is a breathable sealer. It should be okay to apply over 3 year old SB-600
  • We will reply to your comment shortly
    joe az · 06/04/2012
    is this product breathable and can it be applied over sb -600 that was applied 3 years ago and has lost all its shine
  • We will reply to your comment shortly
    scott paul · 01/16/2012
    The SuperSeal Matte is the same as the SuperSeal25 but with an additive to lower the shine to a satin. It does not remove the shine completely.

    Throw the rollers away would be best. Not worth it to save them. Lacquer thinner can be used if needed.
  • We will reply to your comment shortly
    Ray Hooper · 01/16/2012
    Is the Superseal matte finish the same product of the Super seal 25 without the shine? What do you use to clean the rollers after use?
  • We will reply to your comment shortly
    scott paul · 01/16/2012
    This will work for your scenario as the SuperSeal25 is a solvent based sealer and can be easily applied with a roller.
  • We will reply to your comment shortly
    Ray Hooper · 01/16/2012
    Hi, I would like to apply a sealer to my colored brick pavers and travetine pavers around the pool. It has a current coat clear semi-gloss and solvent based that the pool installer used with an air compressor. I was not a big fan of the air compressor method of application and would like to save some $$$ and use a roller instead....the air application left spider web strings all over. Please let me know if this works. Thanks. Ray
  • We will reply to your comment shortly
    scott paul · 01/11/2012
    Typically lasts about 2 years on brick pavers. Yes it will create a wet look and is the correct product. You would need 3 pails for 1500 square feet.
  • We will reply to your comment shortly
    Hassan · 01/11/2012
    Hi, what is the life for this product? I have about 1500 sq-ft of concrete paver and like to seal it and have wet look. Is this the right product and how much do I need?

    Thanks