SuperSeal30 Gloss 5 Gallon

$199.99
free shipping with ground services
Color

SuperSeal30 can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Bricks, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. SuperSeal enhances the natural color of your Concrete Brick Pavers and Cement with a "wet" look.
SuperSeal30 can be applied with a 1/2" roller cover. You cannot use a sprayer.

SuperSeal30 will help sand erosion reducing the amount of weeds.

One coat is recommended. Coverage is about 100 feet per gallon or 500 feet per five gallon.

One coat will result in a high gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

This Product is not VOC Compliant in Every State

Click here for a VOC Compliant Product

Note: Super Seal 30 is not suggested for Clay Pavers.

Super Seal 30 Comes in Clear and Brown Tinted

Super Seal 30 in Clear on Exposed Aggregate

Super Seal 30 Clear

Super Seal 30 in Brown Tinted on Exposed Aggregate

Super Seal 30 Brown Tinted

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Bruce Watson · 05/06/2023
    Can I apply Superseal 30 over Sika Pro Select Crack Flex Sealant that I applied to the expansion cuts?
  • We will reply to your comment shortly
    jay · 05/05/2023
    what prep is needed for using super seal 30  on exterior walkways with exposed aggregate 
    • We will reply to your comment shortly
      ConcreteSealerStore · 05/05/2023
      Pressure wash to remove any dirt or grime. If you have any stains, you will need a cleaner that is specific to the stain.
  • We will reply to your comment shortly
    jay · 05/05/2023
    what preparatin is needed for using super seal 30 on exposed agg exterior walkways 
  • We will reply to your comment shortly
    Edwin Rodas · 03/23/2023
    How long you think this product will hold up to Las Vegas heat
  • We will reply to your comment shortly
    Tom · 02/14/2023
    Trying to find out any suggestions. This was a customers patio. We’ve used SS30 numerous times with no problems. First time this has happened . We used xylene and it looked good afterwards. About 30 days after the xylene this is happening again. Looking for some type of guidance to remediate this problem. Thank You 
  • We will reply to your comment shortly
    Angel Ramirez · 01/05/2023
    Is it possible to lay some super seal 30 on garage concrete after prepping along with flakes first coat then top coated with a polyurethane? 
  • We will reply to your comment shortly
    Kevin Reardon · 10/01/2022
    I sealed my patio a year ago, but noticed that there was bubbles when I did it last time.  I was wondering what I did wrong?  I rolled it on and maybe put to much sealer on?  I used the super gloss 30.  Do I need to strip it before sealing it again? Thanks 
    • We will reply to your comment shortly
      ConcreteSealerStore · 10/02/2022
      This can happen when you apply to stamped concrete in full sun. Avoid the hot sun if possible. 
  • We will reply to your comment shortly
    steve manning · 08/07/2022
    what do you recommend for clay pavers ?
  • We will reply to your comment shortly
    Praveen · 07/29/2022
    Hi

    I am planning to do a Concrete Sealing for my patio (DIY). Its stamped concrete recently poured 3 months ago. I am no big fan of Wet look and high gloss. Can you please recommend what type of Acrylic sealer should I go for to complete the project. I need the sealer to stay longer than the gloss and the shine. Would prefer Matte finish and Clear if possible.

    Thank You
  • We will reply to your comment shortly
    gelmar · 05/28/2022
    will this work with Toronto weather? I have concrete aggregate with stamp concrete border. do you have stores/dealership in Toronto area?
    • We will reply to your comment shortly
      ConcreteSealerStore · 05/29/2022
      Yes, it will work there. No dealers. Online ordering only.
      • We will reply to your comment shortly
        Gelmar · 06/02/2022
        The approximate area of my concrete to be sealed is 1850 sq ft., how many litres should I get? And how many coating should I do?
  • We will reply to your comment shortly
    Cheryl Olson · 05/16/2022
    What is the clean-up for this product?  It is solvent based, so assuming paint thinner??  Just placed order for 5 gallons and didn't see anywhere on website where it gives application or cleanup directions.  Thanks
  • We will reply to your comment shortly
    Barney · 05/12/2022
    Does this product expire 
  • We will reply to your comment shortly
    Mark · 04/06/2022
    Can Superseal30 be recoated months later without removing the first application?
  • We will reply to your comment shortly
    Mike Udstuen · 12/19/2021
    I would like to know where you are located ? If in Florida where ? and how does this product hold up in the high heat and sun of Florida ? 
  • We will reply to your comment shortly
    Vinny · 12/08/2021
    How does this product compare Eagle or Thompson’s, which are sold at the big box stores?
    • We will reply to your comment shortly
      ConcreteSealerStore · 12/08/2021
      Thompson's useless and does nothing to actually enhance or protect pavers. Never heard of the Eagle brand. We would never trust any of the Big Box Brands. You can read many reviews online for them.
  • We will reply to your comment shortly
    Allen · 07/15/2021
    I have exterior aggregate (16 inches wide) surrounding regular concrete parking pads in front of a 3 car garages. Then the full aggregate turns into a walk, steps and porch to my front door. The Aggregate is in black colored concrete but the parking pads are regular grey concrete color. I was going to use the Super seal 30 on the aggregate and pads but seeing your comments to others that it dries uneven on regular concrete I guess the Super Seal 30 won't work on my big parking pads in the middle of the aggregate? If it won't, what sealer should I use on the regular concrete? Will it be the wet look like the Aggregate? Thanks in Advance!
    • We will reply to your comment shortly
      ConcreteSealerStore · 07/15/2021
      No wet look or gloss sealer will work for regular plain poured concrete as they will all dry blotchy. You need a sealer that will not change the appearance for this. Try Super Seal-M:https://www.concretesealerstore.com/superseal-m-5-gallon.html
      • We will reply to your comment shortly
        Allen Harmon · 07/16/2021
        Thanks for this info. I didn't need to have the wet look on my regular poured concrete but I did want to protect it with the correct sealer. Thanks for saving me a big mistake and now I can look smart to my wife LOL. 
  • We will reply to your comment shortly
    Gary Smith · 07/10/2021
    We have around 635 Sq feet of surface, how much product would we need to cover, they are paver brick
  • We will reply to your comment shortly
    Thomas Morgan · 06/03/2021
    I just had my driveway stamped last year. Would you suggest gloss or semi gloss and why?
  • We will reply to your comment shortly
    Tony · 05/25/2021
    Is this Super Seal 30 the best product for my travertine tile balcony to seal it and give it that wet look shine? 
  • We will reply to your comment shortly
    How · 04/15/2021
    Can the super seal be used on concrete vertical walls ( chimney) ? 
  • We will reply to your comment shortly
    Rich Nowak · 04/08/2021
    Can  I use the tainted sealer on my stamped concret ? Also when I applied the Clear coating on the concret BUBBLES developed, how do I solve this issue?
  • We will reply to your comment shortly
    David Winston · 03/11/2021
    I clean and sealed a 2,000 sf shop, the concrete is about 3 months old! I turn out clear and with a gloss finish, but if you get down close it looks like small hair line cracking, is this normal, and can I apply a second coats?
    • We will reply to your comment shortly
      ConcreteSealerStore · 03/11/2021
      David, this product is not designed for plain poured concrete. It is for decorative concrete surfaces like stamped concrete, brick pavers, stained concrete, etc. Using it on plain concrete could create issues with penetration and even coverage. The small cracks are most likely due to lack of penetration into the very smooth shop floor. Adding more is probably not going to help, but if you want to test a small area, do that first to see prior to applying to all.
  • We will reply to your comment shortly
    Michael S · 03/07/2021
    I have an acid stained concrete area (no aggregate) around the pool that needs to be resealed. The stain has faded slightly; would it be a good idea to use the brown tainted Super Seal 30 to help enhance the original color or stick with the clear? Will the brown tainted Super Seal fade over time? Thanks.
    • We will reply to your comment shortly
      ConcreteSealerStore · 03/07/2021
      The Clear is what most used unless exposed aggregate. It enhances the surface as if wet with water.
  • We will reply to your comment shortly
    RF · 01/18/2021
    Have smooth troweled shop floor poured about a week ago, will Super Seal 30 work?
    I was told it would work and it did show troweled finished application rate on the can. If this is not correct, what is your recommendation? Thanks!
    • We will reply to your comment shortly
      ConcreteSealerStore · 01/18/2021
      It should work but if you want to confirm, contact Clemons Concrete Coatings directly.
  • We will reply to your comment shortly
    Michael · 10/21/2020
    can I use this on red bricks?
    • We will reply to your comment shortly
      ConcreteSealerStore · 10/21/2020
      Concrete pavers, not clay pavers.
      • We will reply to your comment shortly
        michael · 10/21/2020
        Please tell me why not clay pavers? what will it do if I apply to it?
        • We will reply to your comment shortly
          ConcreteSealerStore · 10/21/2020
          All wet look sealers will dry blotchy and uneven on clay pavers.
  • We will reply to your comment shortly
    Kevin · 10/03/2020
    I have a stamped patio and was thinking of using this product. I live in Colorado Springs and have harsh weather with snow, sun and cold temperatures. I was wondering how long this sealant lasts since I have been sealing mine with a different product every 6 months. Hoping to find something that lasts longer. Also would you recomend the clear sealant? Thanks
  • We will reply to your comment shortly
    ken · 09/28/2020
    driveway pavers sealed with water based product 3 years ago in florida. pavers appear to have no sealer on them.can we use super seal 30?
  • We will reply to your comment shortly
    Carlos · 09/22/2020
    I have unopened 5 gallon cans of superseal30, my question follows.
    How long can they be stored and under what conditions (temperature, etc) ??
    • We will reply to your comment shortly
      ConcreteSealerStore · 09/22/2020
      1-2 years. Maybe longer. Has to be stored in a temperature-controlled room.
  • We will reply to your comment shortly
    John · 09/12/2020
    Your site's info page states that 1gal will cover about 100 ft. Is this 100 sq ft of coverage? Also i have put the aggregate crack filler in my basket. Should it be applied before or after the sealer? I would like confirmation on the coverage before placing an order.