SuperSeal30 Gloss 5 Gallon

$199.99
free shipping with ground services
Color

SuperSeal30 can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Bricks, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. SuperSeal enhances the natural color of your Concrete Brick Pavers and Cement with a "wet" look.
SuperSeal30 can be applied with a 1/2" roller cover. You cannot use a sprayer.

SuperSeal30 will help sand erosion reducing the amount of weeds.

One coat is recommended. Coverage is about 100 feet per gallon or 500 feet per five gallon.

One coat will result in a high gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

This Product is not VOC Compliant in Every State

Click here for a VOC Compliant Product

Note: Super Seal 30 is not suggested for Clay Pavers.

Super Seal 30 Comes in Clear and Brown Tinted

Super Seal 30 in Clear on Exposed Aggregate

Super Seal 30 Clear

Super Seal 30 in Brown Tinted on Exposed Aggregate

Super Seal 30 Brown Tinted

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Maria · 05/07/2019
    Can you please tell me how long before we can walk on stamped concrete after being sealed, or dogs walking on it? Also - how long until it can get wet? Just so we can plan for rain before sealing. Thank you
  • We will reply to your comment shortly
    Billy · 10/08/2018
    What is the temperature range for using SuperSeal30??
  • We will reply to your comment shortly
    Billy · 10/07/2018
    To add to the question below the brand of sealer previously used was Shepler's Super Clear Coat. Can you apply SuperSeal30 directly over it if it is starting to fail?
    • We will reply to your comment shortly
      ConcreteSealerStore · 10/07/2018
      As long as the current sealer has not failed by discoloring or peeling, then you should be okay.
  • We will reply to your comment shortly
    Billy · 10/07/2018
    I have a colored stamped concrete patio. The sealer on it now is starting to fail. Can I use SuperSeal30 over it? I live in Texas on the gulf cost, what is the temperature range to apply the sealer?
  • We will reply to your comment shortly
    Rob · 08/20/2018
    My driveways seal job with SS30 went excellently. However, 5 days later suddenly one little area has a faded slightly whiter look across part of the porch section. What do you suggest happened and how do I go about correcting it v
    • We will reply to your comment shortly
      ConcreteSealerStore · 08/20/2018
      Probably was wet there (internally) when you applied. Apply xylene to the area and it will restore the shine.
  • We will reply to your comment shortly
    James Woods · 08/12/2018
    how long will the shine last with super sealer 30
    • We will reply to your comment shortly
      ConcreteSealerStore · 08/13/2018
      The sealer typically lasts a couple of years. The shine level depends on your environment and can dull slightly over the two years from dirt, grime, UV rays, etc.
  • We will reply to your comment shortly
    Linda · 06/16/2018
    what type of roller do I use so as not to get bubbles on the surface?
    • We will reply to your comment shortly
      ConcreteSealerStore · 06/17/2018
      What type of surface is it? Rollers typically do not leave bubbles. The sun or heat can create bubbles as it dries on stamped concrete. To avoid this, apply late in the day when the sun is about to go down.
      • We will reply to your comment shortly
        LINDA BRINSON · 06/17/2018
        Thank you. I'll give that a try this time.
  • We will reply to your comment shortly
    Todd · 06/02/2018
    Is SuperSeal 30 safe to use on travertine pavers?
    • We will reply to your comment shortly
      ConcreteSealerStore · 06/03/2018
      Customers have used the SS30 on travertine pavers without issues.
  • We will reply to your comment shortly
    marion · 05/02/2018
    how mush grip do you add to 5gal bucket super seal30
  • We will reply to your comment shortly
    ConcreteSealerStore · 08/22/2017
    The Super Seal 30 will work for stamped concrete.
  • We will reply to your comment shortly
    Sharon Sellhausen · 08/22/2017
    I need to seal a 1300 sq ft stamped patio. The 2 colors are faded and its starting to crack. Which product do you recommend? I need it asap. The original concrete installer is out of business and the quotes I'm getting from others are ridicules. Thank you
  • We will reply to your comment shortly
    ConcreteSealerStore · 08/16/2017
    The SS30 is the correct product for this area as well.
  • We will reply to your comment shortly
    Kristen Roland · 08/15/2017
    We always Super Seal 30.....Love the shiny wet look it gives.....but if I am going to do a Stamped concrete deck around a salt water pool , will the salt water eventually wear off the seal? Should I use something other than Superseal 30?
  • We will reply to your comment shortly
    ConcreteSealerStore · 07/16/2017
    Yes you can do this.
  • We will reply to your comment shortly
    Darin · 07/15/2017
    Hi there. A little over a year ago, I ordered SuperSeal25 semi-gloss from you and applied it to my driveway and patio (which are brick pavers). I've realized over the past year that I would like a high gloss finish. It's been about 16 months since the last treatment and I live in Florida. Can I apply SuperSeal30 high gloss directly over it? Thanks!
  • We will reply to your comment shortly
  • We will reply to your comment shortly
    JohnDG · 05/22/2017
    Is there a Specsheet and instructions available so I know best temperature to apply?
  • We will reply to your comment shortly
    ConcreteSealerStore · 05/01/2017
    Without knowing the type and brand of the previous sealer, it has hard to say for certain. Also, white spots can be a sign of a bad sealer that has blushing issues. Adding another sealer on top does not always fix this issue.
  • We will reply to your comment shortly
    Cindy Reynolds · 05/01/2017
    We need to reseal our stamped concrete patio. I don't know what type of sealer the previous owners used. The patio has some white spots. Can we just apply the super seal 30 without stripping?
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/23/2016
    Roll on stripper at 200 sq. feet a time. Let site for 15 minutes and heavy pressure wash to remove. Repeat until all is stripped. It is helpful to use the Cleaner Degreaser after the stripping is done.
  • We will reply to your comment shortly
    leon · 06/23/2016
    Hi,
    I would like the directions for using your concrete sealer stripper.
    Thanks
  • We will reply to your comment shortly
    KenC · 06/09/2016
    I will be installing a new paver patio soon. Do I need to pressure wash it prior to applying the sealer?

    Thanks.
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/08/2016
    Only online from our website.
  • We will reply to your comment shortly
    Sonya · 06/08/2016
    Took your advice and stripped porch and sidewalk pavers, which required more time and effort than expected, but look surprisingly great. Where can I buy SS30 in Greenville, SC?
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/01/2016
    We do not have a crack filler that will blend with Stamped concrete.
  • We will reply to your comment shortly
    john terzolino · 06/01/2016
    First off thank you for responding so fast. I really appreciate the customer service.

    One last question I have some cracks along the edge of the concrete by the pool and some in the main area. Is there a product i can fill the cracks with that wont change the color and stand out
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/01/2016
    1. If it has a haze, then yes you should remove. It is not an easy chore to strip sealer but can be done. Look at this product:
    http://www.concretesealerstore.com/Concrete-Sealer-Stripper-5-Gallon.html

    Apply in sections of 200 sq. feet at a time and pressure wash off. Repeat until gone. Finals wash with the Cleaner Degreaser:

    http://www.concretesealerstore.com/Cleaner-Degreaser.html

    2. Not the same, but close in performance.

    3. It can be slightly slippery. Best to get the Super Grip:

    http://www.concretesealerstore.com/Super-Grip.html

    4. 2 Pails of Stripper, 2 gallons Concrete Cleaner Degreaser to use after stripper, 2 pails of SS30, and 2 Super Grips.
  • We will reply to your comment shortly
    Doc · 06/01/2016
    I have a 8 yr 1200ft stamped concrete with rich browns/red tones. I believe the multiple sealers were used water and non water. When dry the stamped concrete has a white dull haze. I need some clairfication and help.

    1. Do i need to strip old sealer. If so how and is it difficult? What product and are there instructions?

    2. Im getting superseal 30. I have friends in WV i can ship too bc i live in Pa. Or is Voc product the same?

    3. This is stamped concrete around a inground pool. Is the superseal 30 slippery when wet? I dont want kids to fall an get hurt.

    4. 1200sft. How much sealer,grip (if advise) product and strip (if needed)

    Thank you
  • We will reply to your comment shortly
    ConcreteSealerStore · 05/27/2016
    1/2" to 3/4". Look at the rollers that look like a yellow sponge.
  • We will reply to your comment shortly
    Doug Herrington · 05/26/2016
    I am about to apply super seal 30 to my concrete pavers what size of nap do I use to roll the sealer on