SuperSeal30 Gloss 5 Gallon
SuperSeal30 Gloss 5 Gallon

SuperSeal30 Gloss 5 Gallon

$154.99
free shipping with ground services
Back to: Concrete Sealers

SuperSeal30 can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Bricks, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. SuperSeal enhances the natural color of your Concrete Brick Pavers and Cement with a "wet" look.
SuperSeal30 can be applied with a 1/2" roller cover. You cannot use a sprayer.

SuperSeal30 will help sand erosion reducing the amount of weeds.

One coat is recommended. Coverage is about 100 feet per gallon or 500 feet per five gallon.

One coat will result in a high gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

This Product is not VOC Compliant in Every State

Click here for a VOC Compliant Product

Super Seal 30 is not suggested for Clay Pavers.

Related Products

SuperSeal30 Gloss 1 Gallon

Concrete Sealers
$33.99
Super Grip

Brick Paver Sealers
$24.99
Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    Mac Caradine · 04/28/2013
    Two years ago a contractor pour a patio and used a stamp board, then applied dry power color to the concrete before it dried. Then the next day he washed off the excess powered and then applied Kure and Seal 30 as the sealer. Some of the concrete is starting to show where the color has worn. I want a high gloss wet look. What do you recommend?

    Mac
  • We will reply to your comment shortly
    ConcreteSealerStore · 04/24/2013
    mhkaighn, you can just seal over top of it.
  • We will reply to your comment shortly
    ConcreteSealerStore · 04/24/2013
    Denny, I would use the SuperSeal30
  • We will reply to your comment shortly
    Denny · 04/23/2013
    I have a stamped concrete patio, brownish color. What would be the best sealant to buy to re-seal it this summer?
  • We will reply to your comment shortly
    michael kaighn · 04/22/2013
    If I seal my stamped concrete pool deck with super seal 30. When I seal again in 3 years can I seal over top or does the old sealer have to be removed?
  • We will reply to your comment shortly
    ConcreteSealerStore · 04/18/2013
    I will probably be okay as long as the sealer is able to penetrate.
  • We will reply to your comment shortly
    Steve Brannon · 04/17/2013
    Will SuperSeal30 be alright to seal an outdoor concrete dining table that has been dyed and sanded by hand with 220 grit? I will also want to apply a beeswax after sealing?
  • We will reply to your comment shortly
    ConcreteSealerStore · 08/23/2012
    Hazing can happen form many reasons and typically is from over application or trapped moisture. Typically it is trapped moisture. I would apply a little solvent such as xylene to the affected areas. it should remove the hazing.
  • We will reply to your comment shortly
    erickj · 08/22/2012
    After two heavy coats of super seal I am still seeing a little haze. The drive was power washed with a 3000 psi washer and dried for days. I waited about two to three weeks before the second coat was applied. It was june when it was done so temp was good. Could it be a problem with the aggergate or with the sealer or either?
  • We will reply to your comment shortly
    ConcreteSealerStore · 06/01/2012
    The only way to fix you issue is to remove the failed sealer with a stripper and start over: Concrete Sealer Stripper ([url]Concrete-Sealer-Remover.html[/url])
  • We will reply to your comment shortly
    Matt · 05/31/2012
    I am looking to re-seal my stamped concrete patio that was installed a year ago. The color is supposed to be a deep and rich burgundy color but white/gray colors have overtaken many areas. I attempted to re-emulsify that sealant by rolling on two coats of Xylene. When wet, the color is correct but once it dries the white/gray reappears in affected areas. I was under the advice to remove the previous sealer (unknown) by wiping Xylene on the surface with a rag then applying a new sealer. Would the SuperSeal30 gloss permanently darken these spots (color is correct when wet)and be an appropriate fix?
  • We will reply to your comment shortly
    ConcreteSealerStore · 05/21/2012
    It should work but I have never heard of anything called "textured skin"
  • We will reply to your comment shortly
    joe v · 05/21/2012
    I'm looking to apply a sealer for the first time since the concrete was installed 3 years ago. It was sealed initially. The description of the installation was called a "textured skin". I would like to enhance the highlights of the concrete. Would you recommend this product?
  • We will reply to your comment shortly
    ConcreteSealerStore · 04/16/2012
    Sorry but there is not any dealers in your area. We can ship to you with.
  • We will reply to your comment shortly
    Casey Talbert · 04/16/2012
    Is there someplace that stocks the Super Seal 30 near Bradenton Florida? We are about 45 minutes south of Tampa on the coast.
  • We will reply to your comment shortly
    ConcreteSealerStore · 04/10/2012
    The SuperSeal30 is our high gloss sealer. One coat is needed and coverage is 500 sq. feet per pail. You would need 4 pails for the 2000 sq. feet.
  • We will reply to your comment shortly
    Richard · 04/10/2012
    Looking for a super wet look product that is easy to apply and can hold up to the desert heat. We have approx 2000sf. of pavers that should be completed in a couple of days. We want to enhance and protect them but do not want to risk ruining them at the same time.
  • We will reply to your comment shortly
    ConcreteSealerStore · 04/07/2012
    Actually both. It soaks in and slightly films. It is a breathable sealer as well.
  • We will reply to your comment shortly
    Uday · 04/06/2012
    I have recently installed concrete pavers and am thinking of sealing with SuperSeal30. I am curious if this is a penetrating sealer or if it forms a film. Thanks.
  • We will reply to your comment shortly
    ConcreteSealerStore · 03/26/2012
    Acid washing does not work on previously sealed surfaces.

    Yes the SuperSeal30 is a great sealer for driveways and will hold up to vehicle traffic.

    2 years is normal for driveways. Nothing will last longer.
  • We will reply to your comment shortly
    cunfuzed · 03/26/2012
    i have a very large stamped driveway and sidwalk will this hold up well against vehicle traffic? also should i acid wash the driveway b4 appliying? the driveway has been resealed 2 times in 10 years and does'nt seem to last more than 2 years is there something that lasts longer?any reccomendations would be apreciated. 1 more do you ship this to nj
  • We will reply to your comment shortly
    ConcreteSealerStore · 03/24/2012
    Clear since it is a solvent based sealer. White is only water based sealers.
  • We will reply to your comment shortly
    Wade Hall · 03/24/2012
    Does the Super 30 gloss solvent based sealer start off white in color or clear in color?
  • We will reply to your comment shortly
    ConcreteSealerStore · 03/23/2012
    The SuperSeal30 is acrylic based.
  • We will reply to your comment shortly
    angelo · 03/22/2012
    is superseal30 acrylic or urethane
  • We will reply to your comment shortly
    ConcreteSealerStore · 02/24/2012
    Before will help solidify the sand. If rolling the sealer:

    1. Make sure that the sand is down at least a 1/4 inch from the top of the pavers. Lower is better with the sand. Use a leaf blower to get the sand evenly down in the cracks.

    2. Use a yellow "sponge" type roller. These have a tendency to not get as deep in the joint cracks.

    3. Pay attention! If you see sand getting stuck in large clumps on top of the pavers, stop! Easier to fix a small section then the entire driveway.
  • We will reply to your comment shortly
    Larry E. Allen · 02/23/2012
    Sorry guys just want to make sure about re-sanding. Should I re-sand before or after the sealer. My understanding is before and to be sparing with the sand as it doesn't need to come up to the top of the pavers. Thanks for your patience as can only afford to do it once every 2 years and want to make sure.

    Larry
  • We will reply to your comment shortly
    ConcreteSealerStore · 02/23/2012
    Yes but a couple of notes:

    SuperSeal30 is solvent based not oil based.

    Rolling is fine but you do need to be careful with newly installed sand. Rollers can "pull" the sand out of the joints, leaving sand on top of the pavers. You need to be careful that this does not happen.
  • We will reply to your comment shortly
    Larry E. Allen · 02/23/2012
    I have 1300 square feet of paver brick drive way. Its clean with no oil or stains. I propose using super seal 30 high gloss after washing off. Letting it dry completely a day or two. re sanding and apply the superseal 30 high gloss by roller which from my understanding is a oil based solution. I live in central Florida am I on the right track is my question.
  • We will reply to your comment shortly
    ConcreteSealerStore · 02/21/2012
    Yes the SuperSeal30 will work for your pavers. It darkens the color and leaves a gloss shine. Non-yellowing breathable sealer that it is not prone to turning milky white.

    Easiest to apply with a "sponge" type roller. Just dip the roller into the bucket and spread at 100 feet per gallon.

    Thanks!