SuperSeal30 Gloss 5 Gallon

free shipping with ground services

SuperSeal30 can be used for Stamped Concrete, Stamped Cement, Decorative Cement, Bricks, Acid Stained Cement, Concrete Stains, and Exposed Aggregate. SuperSeal enhances the natural color of your Concrete Brick Pavers and Cement with a "wet" look.
SuperSeal30 can be applied with a 1/2" roller cover. You cannot use a sprayer.

SuperSeal30 will help sand erosion reducing the amount of weeds.

One coat is recommended. Coverage is about 100 feet per gallon or 500 feet per five gallon.

One coat will result in a high gloss sheen depending on porosity of brick. Extra coats will result in a higher gloss.

This Product is not VOC Compliant in Every State

Click here for a VOC Compliant Product

Note: Super Seal 30 is not suggested for Clay Pavers.

Super Seal 30 Comes in Clear and Brown Tinted

Super Seal 30 in Clear on Exposed Aggregate

Super Seal 30 Clear

Super Seal 30 in Brown Tinted on Exposed Aggregate

Super Seal 30 Brown Tinted

Ask a Question or Post a Picture...
You are guest ( Sign Up ? )
or post as a guest
Loading comment... The comment will be refreshed after 00:00.
  • We will reply to your comment shortly
    ConcreteSealerStore · 02/21/2012
    Yes the SuperSeal30 will work for your pavers. It darkens the color and leaves a gloss shine. Non-yellowing breathable sealer that it is not prone to turning milky white.

    Easiest to apply with a "sponge" type roller. Just dip the roller into the bucket and spread at 100 feet per gallon.

  • We will reply to your comment shortly
    Wayne Miller · 02/21/2012
    I appreciate reading all the reviews and your information on the superseal 30. It has been very informative. I'm getting ready to seal my recently installed pavers on my pool deck. I had Tremron pavers installed and I live in Forida. I just want to be sure this is the right product. I do want the wet look and to darken the colors on my pool deck. Am I on the right path? I do not want this to leave a white residue and as such I will seal when it's completly dry. What nap/brand roller is recommended for the superseal 30 and how best to apply...dip the roller right into the 5 gallon bucket, pour the sealer into a mteal paiters pan and roll from there, etc. Your information is most helpful.

    Wayne Miller
  • We will reply to your comment shortly
    ConcreteSealerStore · 02/12/2012
    All the sealers we sell are non-yellowing.
  • We will reply to your comment shortly
    Larry E. Allen · 02/11/2012
    Hope these products are non yellowing because have heard horror stories about sealers from local retailers.
  • We will reply to your comment shortly
    ConcreteSealerStore · 01/31/2012
    Yes this would work for indoors but it would have a very strong odor. Might want to look at this instead:

    MasonrySaver Decorative Concrete Sealer ([url]MasonrySaver-Decorative-Concrete-Sealer-5-Gallon.html[/url])
  • We will reply to your comment shortly
    J Lovitt · 01/31/2012
    I laid down a thin coat concrete that I stained, in my entryway, dining and living room it is textured and not shiny at all. Can I apply this to get give it a sleek shiny look indoors?
  • We will reply to your comment shortly
    scott paul · 01/24/2012
    The shine level depends on the porosity of the substrate, how many coats applied, and if the surface has been sealed before.

    In general it has a very good gloss but creating a "glass" like look to the surface is a bad idea.
  • We will reply to your comment shortly
    robert · 01/23/2012
    How shiny is this product. I have seen some pavers with a coat that is super shinny almost as if there is a piece of glass on top. do you have a product like that?
  • We will reply to your comment shortly
    ConcreteSealerStore · 01/06/2012
    Adding a "wet look" sealer such as the SuperSeal 30 will darken the color as if wet with water and leave a shine.

    What type of surface is the driveway? Pavers, stamped concrete, regular white concrete?
  • We will reply to your comment shortly
    NELSON PEREZ · 01/05/2012
    I have a very long driveway and through time it is showing normal wear and tear, no chipping, no cracks. I live in New York. I wanted to add color into the concrete and sealer....what would you recommend I do?

    Thank you

    Nelson Perez
  • We will reply to your comment shortly
    scott paul · 12/26/2011
    Typically SuperSeal30 will need to be reapplied every 2 years.

    You cannot stop chipping with a sealer. This is a concrete issue. Sealing may slow it down a little.
  • We will reply to your comment shortly
    Paul Mailhot · 12/24/2011
    What is the average wear time for your Super Seal30 Gloss sealer.
    We also have chip spots on the stamped driveway and wondering what to do prior to sealing with your product. Driveway installer will not return calls. Thanks for your help.